ADCO

Vickers O-Ring kit

$14.00

Each kit is one brass spacer and 5 O-rings for Vickers MK1  which eliminate the need for packing material in the muzzle gland.
The Vickers O-ring will seem too big. Install it first and it will fit in the back pocket perfect.

Out of stock

Categories/Brands: ,

Description

To install the Vickers O-ring and spacer you need:

O-ring

Brass Spacer

Grease

Teflon tape

 

Step 1. With the barrel removed install the o-ring into its seat inside the water jacket.  It looks like it wont fit, but it will.

Step 2. Grease the barrel where the o-ring makes contact and reinstall through the o-ring.

Step 3. Install the brass spacer with the flat end facing the o-ring.

Step 4.  Screw on the muzzle nut/booster until it’s snug.  Push on the barrel and make sure it moves freely in the gun.  If they barrel does not move, loosen the booster nut 1/4 turn. The booster nut not being tight against the water jacket wont hurt anything.  If you are afraid of it coming loose, remove the booster and wrap the threads in teflon tape for added friction.

 

If you want to make the spacer a prefect fit (tight on water jacket) with your Vickers, grab a file, some emery paper. You may only need to remove .015.

Copyright ©2024 ADCO Firearms, LLC

Availability and pricing of all products are subject to change without notice.

All sales are final, there are NO returns on any firearms, parts or accessories.
On special occasions, purchased items (firearms excluded) in their original, unopened packages may be exchanged for store credit.