Description
If you’re sending a barreled action for a contour that is already threaded – if the threads are .003 concentric and less we will do the job. Anything beyond that you will be charged $40 for checking the threads and the barrel will be sent back on your dime unless you want it shortened and rethreaded.
We will adapt your stripped barreled action to accept our custom made collar for any of the Allen Engineering or OPS INC Suppressors. Price includes required contouring, 1 custom collar and threading. Don’t send us your collar, we won’t use it. This is not a customizable service.
The lengths and dimensions are based on the math needed to mount the suppressor properly based on the length of the barrel. If you are sending a barrel you want cut down, be sure to note length in comment section at checkout. i.e. 20″ barrel cut to 16″.
OPS 12th = AEM5/AE30
This is for a stripped barreled action only. You must remove the trigger, optic mounts, etc. If you send parts attached, it will be sent back on your dime because you are too stupid to read these directions. You can send it back after you remove the parts.
You must include a copy of a photo ID. The address on the photo ID is the address where we will return ship the firearm. No exceptions.
If the barreled action contains any part/protrusion that is more than 1.25″ off the center line of the bore we cannot thread it.
Turn around is 15-20 business days for this service.
